bigboi BlowR Mini+
bigboi BlowR Mini+
Touchless Car Dryer For the Car Enthusiasts & Detailing Professionals.
As every detailer knows, non-contact detailing methods greatly reduce the chances of putting scratches into paintwork. Whilst the wash process still requires a mitt, the drying process no longer requires a drying cloth!
Eliminate Scratches & Touching Dirt
Dust and dirt can become trapped in the long, absorbent fibres of drying cloths and can cause scratches when the towel is rubbed over the paint. The edges of cloths can cause marks as the towel is 'whipped' back and forth.
Synthetic chamois can be ineffective in soaking up water and natural chamois can remove wax protection. Using the BigBoi BlowR range of dryers eliminates all these possibilities, so you never have to worry about inadvertently marking your paintwork when drying it.
Bridge The Gap
Introducing the BigBoi BlowR Mini+. It has been designed to help bridge the gap between the Mini and the PRO. Now customers can enjoy the power of a twin motor unit at a more affordable price point. The Mini+ is the most affordable twin motor unit packed with the latest cutting edge technology in the industry today. Built from the ground up, this unit was designed with the detailer in mind, with twin 1400 watt motors that use heated, filtered air to chase water off paintwork, metal, glass and chrome.
The blast of air forces trapped water out from behind badges, head and taillight surrounds, mirror housings and other hard to reach areas. The BlowR Mini+ is supplied with 2 interchangeable nozzles with a nozzle locking system to ensure air can be directed along channels and grooves. The BigBoi Temperature Technology (BTT) function ensures the BlowR Mini+ uses adjustable heated air from 15 to 40 degrees C above ambient air temperature for optimum drying and evaporation. Select from 1 or 2 motors, plus wind adjustment mode for controlled drying depending on the task at hand.
Features & Benefits:
- Touchless drying keeps paintwork safe from scratches & swirls
- Powerful twin motors blast water out of traps & away from surfaces
- Dries vehicles up to 80% faster than traditional drying methods
- Great for drying around filler caps, wheel spokes, callipers & nuts
- Forces water from around side mirror housings
- Dries engines & components quickly, prevents corrosion
- Adjustable wind control up to 275km/h (171mph)
- BigBoi Temperature Technology (BTT) - Adjustable heat from 15 to 40 degrees C above ambient air temperature for faster evaporation
- Uses warm filtered air
- Use on paint, glass, wheels, chrome, fabric convertible roofs
- Safe for use on all finishes including vinyl wrapped & satin matte
- Supplied with 2 interchangeable nozzles with nozzle locking system.
- Foam air filter included (washable & reusable)
- 2 x 1400-watt twin motor system producing up to 5HP
- Airflow: CFM/FPM 58,600 ft/min
- DB rating: Low 75 High 81
- 5m commercial grade hose- rated to be the most flexible hose in today's market.
- 2 x lockable rubber hose nozzle with bigboi New locking Nozzle system.
- Low noise reduction single filter system
- EZ Change foam filter
- Size: 53 x 24.5 x 24cm
- Weight: 5.2kgs
The way the 4 stage heating works on the MINI+is as below.
• 1 motor- you have 2 stages where you can change the heating, please note this is done automatically on this unit. 1st stage is in full mode where the unit motor will generate the heat to a designed level. 2nd stage is in adjustment mode where you can adjust the motor speed to give you different heat settings along the way.
• 2 motors- same as the above but giving you 4 stages in total. Its not like the mini where a heating element is needed inside that you can select and increase the heat. The unit has been designed to alter its heat for ease of use depending on the stages you select.