OPTiX Square-1 Wax Stripping Car Wash & Surface Prep - AutoFX WA Car Care Products
OPTiX Square-1 Wax Stripping Car Wash & Surface Prep - AutoFX WA Car Care Products
OPTiX Square-1 Wax Stripping Car Wash & Surface Prep - AutoFX WA Car Care Products
OPTiX Square-1 Wax Stripping Car Wash & Surface Prep - AutoFX WA Car Care Products

OPTiX Square-1 Wax Stripping Car Wash & Surface Prep

Regular price$149.00
/
Tax included. Shipping calculated at checkout.
Size

OPTiX Square-1 Wax Stripping Car Wash & Surface Prep

Introducing the OPTiX Square-1; a wax, sealant and glaze stripping car wash for surface preparation. This hydrophilic shampoo strips waxes with ease while removing dirt and grime, leaving you a bare unprotected surface with mega water sheeting. Use this product prior to a paint correction for a clean surface to polish. Works well in a foam cannon!

What To Use It For:

  • Strip/removes waxes, sealants and glazes
  • Create a bare surface
  • Allow ceramic coatings to bond properly
  • Remove dirt and grime from paint
  • Make clay barring easier

Proper Surface Preparation

Waxes, sealants and glazes act as a bonding barrier for ceramic coatings, paint protection film, vinyl, decals and more. Removing these unwanted products on the surface is important for allowing other products to properly bond or adhere. It is also good to wash down the car with Square-1 prior to a paint correction so you do not clog your buff pads with waxes, sealants or glazes.

The Safe Solution

OPTiX Square-1 is a fool-proof and safe product to use. Don't mess around using degreasers, solvents or laundry detergents that can do some unwarranted damage. Take comfort in knowing Square-1 will not ruin your exterior trims nor will it leave any unwanted stains. Do note that this product is not effective when used in small amounts in a bucket.

How To Use It:

  1. Shake OPTiX Square-1 well.
  2. Pour up to 100mL in your hose dispenser and set to foam / or pour up to 400mL into your foam cannon / or pour up to 150mL into your wash bucket.
  3. Foam up your vehicle using a hose dispenser or foam cannon / or dip mitt into wash bucket
  4. Wipe down vehicle using your wash mitt while the car is still foamed.
  5. Rinse the vehicle down well.
  6. Dry the vehicle using a blower or dedicated drying towel.